A professional mechanical contractor can install your new generator in your home. A mechanical contractor will know how to connect the generator to your gas line. He will also determine whether your gas meter is large enough to handle the new appliance. The mechanical contractor will coordinate with your local gas company to install the generator. The generator will be delivered in a truck, which you will need to move to your installation site. You will need at least six strong men and two 3/4-inch black iron pipes to install a 20-kilowatt generator.

Before you begin the process, it’s important to know the codes and ordinances in your area. Professionals understand the codes and ordinances in your area. In addition, they will have all the proper tools to complete the project correctly. DIYers will know that proper tools make a job easier, but the fact is that generator installations are dangerous and require specialized knowledge. If you aren’t sure what tools are needed for the job, hire a professional at https://www.ampi-electricinc.com/.
The National Electric Code (NEC) requires generators to be located at least five feet away from combustible construction. A generator must also be fire-rated on the wall adjacent to it. You can determine this by consulting the white book. Weatherproof housing, however, can be a helpful option, as it can contain a fire inside its enclosure. Working clearances must also comply with National Electric Code regulations. NFPA 37 requires generators to be located at least five feet away from combustible buildings, but this doesn’t always guarantee a perfect installation.
When choosing a generator, you should also consider your generator’s ventilation and cooling system. A generator’s ventilation system must be adequately sized and configured to handle its load. If the generator isn’t properly vented, the heat can damage the components and make them unsafe. If the vents are too small or too large, an electrician can install additional ventilation and cooling units in your home to meet the EPA guidelines. In addition, a generator can’t be used without an adequate cooling system.
Fortunately, most portable generators don’t require a professional installation. However, if you’re planning to install a permanent emergency unit, a professional is a good idea. A professional will be able to recommend power options, pour a concrete pad, and install the necessary electrical wiring. Also, installed home generators can draw a lot of gas and power. In fact, a prolonged power outage can cost as much as $30 per day!
A transfer switch is an essential part of the generator installation process. It connects the generator to the automatic transfer switch and non-critical loads. During a generator failure, the automatic transfer switch should be able to disconnect power and run all necessary equipment. A second automatic transfer switch can help isolate critical loads from non-critical devices. You can also install two automatic transfer switches if you have the space. If you have a big enough space, you can connect two separate generators and one automatic transfer switch and run them independently to protect all your loads.
Once the transfer switch is installed, the generator is connected to the main breaker panel of your home. A licensed electrician will install a transfer switch inside the main breaker panel, changing the load from utility grid power to the generator. When the main power line is down, your gas-powered backup generator will be able to restore the power in your home. With a reliable home generator, you can be assured that no outage will interrupt your life or your family’s comfort.
When you choose a professional, it is best to get a free quote for the whole house generator installation. This way, you can see the full cost of the installation and know what to expect before hiring a contractor. Some installation contractors will even itemize the costs for different parts of the installation, such as a fuel storage tank and an upgraded electrical panel. The average cost of a whole house generator installation is between $500 and $3,000, depending on the size of the generator and its size. You can get a free estimate from local experts right now.